Liquid flow
eyc-tech FDM09-I Venturi Thermal Mass Flow Meter (Liquid / Air)
Feature: Bypass Venturi flow path design with high sensitivity, low pressure loss, and stable repeatability, supporting simultaneous flow and liquid temperature measurement
Sensor Type: Hot-wire sensor
Turndown Ratio: 50 : 1
Measuring Range: DN15: 42 L/min, DN25: 150 L/min, DN32: 250 L/min, DN40: 380 L/min, DN50: 600 L/min
Output: 4 ... 20 mA / 0 ... 10 V / Relay / RS-485
Accuracy: ±1% F.S.
IP Rating: IP65
eyc-tech FTC06 Temperature and Flow Transmitter
Features : Thermal mass measurement of flow and temperature with RS-485, ideal for continuous liquid cooling monitoring in data centers.
Sensor type : PT sensor
Measuring range : 0 ... 3 m/s (Water), 0 ... 60 m/s (Air)
Output : 4 ... 20 mA / RS-485 / NPN
Repeatability : ±0.5%
Accuracy : Water ±(1% mv + 0.05 m/s), Air ±(1% mv + 0.5 m/s)
IP rating : IP65, IP67 (Option)
eyc-tech FUM06 Ultrasonic Flowmeter
Features : Non-intrusive and high-precision measurement, suitable for various fluids and pipe sizes.
Sensor type : Ultrasonic time difference
Turndown ratio : 100 : 1
Measuring range : 0.1 ... 10 m/s
Output : 4 ... 20 mA / 0 ... 10 V / RS-485
Accuracy : ±1% F.S.
IP rating : IP65
Huba 237 Vortex flow sensor
Measuring range : 1,1 ... 240 l/min
Medium temperature : -15 ... 125°C (Non-freezing media)
Media : Heating water with standard additives; Drinking water
Accuracy : <1 % FS(<50% measuring range end value Water);<2%(Measured value)(>50% measuring range end value Water)
Electrical connection : M12x1 connector
Huba 210 Flow sensor for liquid media
Measuring range : 0,5 ... 150 l/min
Response time : 5 ... 500 ms
Media : Heating water with standard additives; Drinking water
Medium temperature : -15 ... 125 °C (Non-freezing media)
EGE SZAb 400 Flow Sensors
Output:Relay/change-over
Supply voltage:AC 230 V ±10%
Ex marking-GAS:II(1)GD [Ex ia] IIC
Ex marking-Dust:II(1)GD [Ex ia] IIIC
EGE SD 504 S Flow rate sensors
Medium:Water
Detection range:1 ... 1000 ml/min (0.001 ... 1 l/min)
Compressive strength:20 bar
Ambient temperature:-20 ... 70 °C
Protection rating:IP 67
EGE SDN 500 Series Flow Sensors
Output:PNP / Relay / Analog
Medium temperature:0...+80°C
Compressive strength:1 ... 20 bar
Protection:IP67
EGE SKM 420 GR/GA Flow Sensors
Output:Relay / PNP / 4 … 20 mA
Supply voltage :DC 24 V ±20%
Ambient temperature:-20 … +60℃
IP rating:terminal: IP 20 / housing: IP 40
EGE SC 440/1-A4-GSP Flow Sensors
Detection range:water 1...150 / oil 3...300 cm/s
Output:PNP
Sensor length L:48 mm
Thread:G1/2
EGE LNZ 450 GA-S Air Flow Sensors
Range:0.5 ... 30 m/s
Output:4 ... 20 mA
Medium temperature:-20 … +80°C
Compressive strength:30 bar
IP rating:IP67
EGE LN 520 GA Air Flow Sensors
Range : 0.5 ... 15 m/s
Output : 4 ... 20 mA
Medium : Air, non-explosive gas
Ambient temperature : -20 … +70°C
IP rating : IP67
Rheonik RHE21 Exd / Exd(e) Extreme Environment Multifunction Coriolis Flow Transmitter
MEASUREMENTS:Mass Flow / Volumetric Flow / Density / Temperature
FUNCTIONS:Batch / Filling Control / Standard Volume Gas Flow / Assurance Factor® / API std. Volume, Net Oil / Tamperproof Lock Switch
OUTPUTS:2 x Analog / 2 x Frequency / Pulse / 2 x Digital Status
INPUTS:2 x Digital / 1 x Analog
INTERFACES:PC USB / RHECom / RS-485 / Modbus RTU / HART over analog
APPROVALS:ATEX / IEC Ex / CSA
Rheonik RHM20 Industrial Coriolis Mass Flow Meter
TYPICAL APPLICATION RANGE:2.25 up to 300 kg/min
MAX. PRESSURE:799 bar / 11588 psi
TEMPERATURE:-196 up to +400°C
ACCURACY:0.1% of rate
MATERIALS:316Ti / 904L / Alloy C22 / Tantalum / more on request
PROCESS CONNECTIONS:1″ up to 3″
EGE SN450 Serise Flow Sensors
Range : Water 1 … 150 cm/s; Oil 3 … 300 cm/s
Output : Relay / 4 ... 20 mA
Medium temperature : -20 … +80°C
Compressive strength : 100 bar
IP rating : IP65 / IP67