Huba 520 Relative Pressure Transmitter

Medium : Liquids, gases and refrigerants (incl. ammonia)
Pressure range : -1 ... 9 bar / 0 ... 2.5 – 1000 bar
Output : 0 ... 5 V, 1 ... 6 V, 0 ... 10 V, ratiom. 10 ... 90% , 4 ... 20 mA
Accuracy : typ. ＜0.3% FS

Huba 520 Relative Pressure Transmitter Huba 520
Huba 520 Relative Pressure Transmitter Huba 520
Download

Features

The compact Type 520 pressure transmitters are based on Huba Control’s advanced thick-film technology, featuring a hermetically welded, seal-free stainless steel
measuring cell. They provide precise measurement of relative pressures up to 1000 bar and offer high burst pressure resistance, reliability, and long-term stability. Type 520 pressure transmitters are suitable for use with liquids and gases, including all common refrigerants and ammonia. This makes them a reliable solution for a wide range of applications, from industrial processes or HVAC systems to railway components. Comprehensive approvals- including EMC with enhanced noise immunity, shock and vibration resistance, as well as certifications such as UL, EN 45545-2, ATEX and IECex confirm its suitability for diverse and safety-critical environments.

• Compact and robust stainless steel design
• Hermetically welded design without seals, no risk of leakage
• Wide variety of connector options
• Time-saving, quick on-site cable assembly with fast cable gland

Specification

Product Features
Pressure range
Relative: -1 ... 9 bar
Relative: 0 ... 2.5 ... 1000 bar
Accuracy
typ.; max. 0.5% fs (incl. zero point, full scale, linearity, hysteresis and repeatability)
Characteristic line a: ± 0.3% fs
Resolution: 0.1% fs
Thermal characteristic (max.): ± 0.2% fs / 10K
Long term stability acc. EN 60770-1 (max.): ± 0.25% fs
Operating Conditions
Medium
Liquids, gases and refrigerants (incl. ammonia)
Temperature
Medium: -40 ... +135 °C
Ambient: -30 ... +85 °C
Storage: -50 ... +100 °C
Tolerable overload
< 6 bar: 5 x fs
> 6 bar: 3 x fs (max. 1500 bar)
Rupture pressure
< 6 bar: 10 x fs
> 6 bar: 6 x fs (max. 2500 bar)
Materials
Cover
Stainless steel 1.4404 / AISI 316L
(inside thread Schrader 1.4305 / AISI 303 only)
Materials in contact with medium
Pressure connection: Stainless steel 1.4404 / AISI 316L
Sensor ≤ 60 bar: Stainless steel 1.4016 / AISI 430
Sensor ≥ 100 bar: Stainless steel 1.4435 / AISI 316L
Plug accommodation
Polyarylamide 50% GF UL 94 V-0
Electrical Data
Output
2 wire: 4 ... 20 mA
3 wire: 0 ... 5 V; 1 ... 6 V; 0 ... 10 V; ratiom. 10 ... 90%
Power supply
7 ... 33 VDC (depending on output version)
Load / Current consumption
Load according to output specification
Current consumption:
< 23 mA (4 ... 20 mA versions)
< 7 mA (voltage output versions)
Polarity reversal protection
Short circuit proof and protected against polarity reversal.
Each connection protected against crossover up to max. supply voltage.
Insulation voltage
Standard 500 VDC
Response time
< 2 ms (1 ms typ.)
Load cycle: < 100 Hz
Electrical connection
Swift connector (with or without cable 1.5 / 2.0 / 3.0 / 5.0 m, PVC spec.)
Connector DIN EN 175301-803-A or C
Metri Pack Serie 150
Connector M12x1
Braids
Connector RAST 2.5 (3 wire only)
Installation
Installation arrangement
Unrestricted
Approvals
EMC
CE conformity acc. EN 61326-2-3
Enhanced EMC protection EN 50121-3-2
Shock
IEC 68-2-27 100 g, 11 ms half sine wave, all 6 directions
Vibration
IEC 68-2-6 20 g, 15 ... 2000 Hz
UL
ANSI/UL 61010-1 acc. E325110
Railway approval
EN 50155 / EN 45545-2
Explosion protection
ATEX / IECEx
Ex II 1/2 G Ex ia IIC T4 Ga/Gb
Ex II 1/2 D Ex ia IIIC T125°C Da/Db
Weight
~ 90 g

Applications

Solar heating / Refrigeration systems / CDU / In-Rack CDU / Circulation cooler / Large heat pumps / Water pumps / Water treatment / Mobile hydraulics / Industrial automation

Download

Datasheet
Note : Design and specifications are subject to change without notice.
Note : Please make sure the product and the device which connect with RS-485 are on common ground, avoid damaged product.