EGE SD 504 S Flow rate sensors
Medium：Water
Detection range：1 ... 1000 ml/min (0.001 ... 1 l/min)
Compressive strength：20 bar
Ambient temperature：-20 ... 70 °C
Protection rating：IP 67
Features
•Flow rate sensor without amplifier
•Robust housing from glass fiber reinforced PBT
•No parts protruding into the flow
•Design for connection to amplifier series SKM 500
•Flow rate monitoring in cooling circuits with small pipe diameters
•Flow rate monitoring in the cooling circuit of melting furnaces
•Detection range: 1....1000 ml/min
Specification
TYPE | SD 504 S |
Product ID | P11251 |
Medium | water |
Detection range | 1 ... 1000 ml/min |
Detection range water | 0.001 ... 1 l/min |
Working range | 0.01 ... 0.8 l/min |
Inner diameter d | 4 mm |
Process connection | G1/4 |
Sensor length L | 67 mm |
Ambient temperature | -20 ... 70 °C |
Medium temperature | 0 ... 80 °C |
Temperature gradient fluids | 300 K/min |
Start-up time typ. | 5 s |
Reaction time typ. | 1 s (0.5 ... 10 s) |
Compressive strength | 20 bar |
Material sensor touched by medium | stainless steel AISI 316 Ti |
Material housing | PBT |
Protection [EN 60529] | IP 67 |
Electrical connection | M12 connector |
Accessories (in scope of delivery) | 4 x gasket G1/4 AFM 34 |
Associated amplifiers | SKM..., SKZ... |
Download
Note : Design and specifications are subject to change without notice.
Note : Please make sure the product and the device which connect with RS-485 are on common ground, avoid damaged product.