Sensor type

Huba 528 OEM type Pressure Transmitter

Medium : Liquids and gases
Pressure range : -1 ... 0 – 60 bar
Output : 0 ... 5 V, 1 ... 6 V, 0 ... 10 V, 4 ... 20 mA, ratiom. 10 ... 90%
Accuracy : typ. < 0.3% fs

Huba 528 IO-Link Relative Pressure Transmitter

Medium: Liquids and gases
Pressure range: -1 ... 0 - 60 bar
Output: IO-Link
Accuracy: <0.3%F.S.

Huba 525 industrial pressure transmitter

Medium : Liquids and gases
Pressure range : 0 ... 0.05 – 0.6 bar
Output : 0 ... 5 V, 0 ... 10 V, 4 ... 20 mA, ratiom. 10 ... 90%
Accuracy : ± 0.35% fs

Huba 520 Relative Pressure Transmitter

Medium : Liquids, gases and refrigerants (incl. ammonia)
Pressure range : -1 ... 9 bar / 0 ... 2.5 – 1000 bar
Output : 0 ... 5 V, 1 ... 6 V, 0 ... 10 V, ratiom. 10 ... 90% , 4 ... 20 mA
Accuracy : typ. <0.3% FS

Huba 680 Pressure sensor

Medium : Liquids and gases
Pressure range : 0 ... 0.1 – 1000 bar
Output : 0... 5 V, 0 ... 10 V, 4 ... 20 mA
Accuracy : <0.25% fs (<0.05% fs on request)

Huba 511 pressure transmitter

Measuring range : -1 ... 0 – 600 bar
Response time : <2 ms (typ. 1 ms)
Media : Liquids and gases
Ambient temperature : <125°C
Electrical connection : M12x1 / AMP / DIN / Cable

Huba 501 Pressure transmitter

Measuring range : -1 ... 0 – 60 bar
Output : 4 ... 20 mA / 0 ... 10 V / 10 ... 90%(ratiometric)
Response time : <5 ms
Media : Liquids / Gases
Medium temperature : -15 ... 80°C
Permissible overload : 2 x FS (max. 80 bar)

Huba 560 Pressure transmitter

Pressure range : - 1 ... 7 bar / 0 ... 10 – 150 bar
Output : 10 ... 90 % (ratiometric) / 4 ... 20 mA
Accuracy : 0.75% FS
Media : Refrigerant / Hydraulic oils / Non-corrosive gases
Pressure connection : Inside thread / Outside thread / Soldering connection

Huba 620/625 Relative pressure switch

Medium : Liquids and neutral gases
Pressure range : -4 ... -900 mbar / 2 ... 6000 mbar
Electrical connection : Screw terminals, flat connector 6.3 mm
Pressure connection :Inside thread M5, hose connector ± 6 mm, outside thread

eyc-tech FDM09-I Venturi Thermal Mass Flow Meter (Liquid / Air)

Feature: Bypass Venturi flow path design with high sensitivity, low pressure loss, and stable repeatability, supporting simultaneous flow and liquid temperature measurement
Sensor Type: Hot-wire sensor
Turndown Ratio: 50 : 1
Measuring Range: DN15: 42 L/min, DN25: 150 L/min, DN32: 250 L/min, DN40: 380 L/min, DN50: 600 L/min
Output: 4 ... 20 mA / 0 ... 10 V / Relay / RS-485
Accuracy: ±1% F.S.
IP Rating: IP65

eyc-tech FTC06 Temperature and Flow Transmitter

Features : Thermal mass measurement of flow and temperature with RS-485, ideal for continuous liquid cooling monitoring in data centers.
Sensor type : PT sensor
Measuring range : 0 ... 3 m/s (Water), 0 ... 60 m/s (Air)
Output : 4 ... 20 mA / RS-485 / NPN
Repeatability : ±0.5%
Accuracy : Water ±(1% mv + 0.05 m/s), Air ±(1% mv + 0.5 m/s)
IP rating : IP65, IP67 (Option)

eyc-tech FUM06 Ultrasonic Flowmeter

Features : Non-intrusive and high-precision measurement, suitable for various fluids and pipe sizes.
Sensor type : Ultrasonic time difference
Turndown ratio : 100 : 1
Measuring range : 0.1 ... 10 m/s
Output : 4 ... 20 mA / 0 ... 10 V / RS-485
Accuracy : ±1% F.S.
IP rating : IP65

Huba 237 Vortex flow sensor

Measuring range : 1,1 ... 240 l/min
Medium temperature : -15 ... 125°C (Non-freezing media)
Media : Heating water with standard additives; Drinking water
Accuracy : <1 % FS(<50% measuring range end value Water);<2%(Measured value)(>50% measuring range end value Water)
Electrical connection : M12x1 connector

Huba 210 Flow sensor for liquid media

Measuring range : 0,5 ... 150 l/min
Response time : 5 ... 500 ms
Media : Heating water with standard additives; Drinking water
Medium temperature : -15 ... 125 °C (Non-freezing media)

EGE SZAb 400 Flow Sensors

Output:Relay/change-over
Supply voltage:AC 230 V ±10%
Ex marking-GAS:II(1)GD [Ex ia] IIC
Ex marking-Dust:II(1)GD [Ex ia] IIIC