eYc FTE120 OEM Air Velocity Transmitter

● 0 ... 5 m/s, low wind speed measurement
● 4 ... 20 mA / 0 ... 10 V output
● Accuracy : ±2% F.S.
● Small size and light weight, can be mounted fast and easily
● Polycarbonate housing, great electrical insulation and flame-retardant properties
● RS-485 programmable software : Data logger / Charts

Input
Sensor：RTD Thermal mass flow sensor
Measuring range：0 ... 30 m/s
Minimum measuring range：0.2 m/s, 0.1 m/s(optional)

Output
Signal：4 ... 20 mA / 0 ... 10 V / RS-485
Accuracy：±2% F.S.
Temp. influence：0.2% / °C
Response time：t90≦5 sec
Load resistance：Current output：≦ 500 Ω / Voltage output：≧ 100 KΩ
Installation angle effect：＜3% of the measured value(When the installation angle＜10°)
Warm-up time：< 2 min.

Environmental
Medium：Air
Body operating Temp.：0 ... 50°C
Body operating Humid.：95%RH(Non-condensing)
Storage Temp.：-20 ... +60°C

Electrical
Power supply：DC 24 V ±10%
Current consumption：100 mA
Overvoltage protection：DC：< 40V
Electrical connections：PVC cable

Installation
Installation：PC nut type / PT movable thread type / Inline type

Protection
IP rating：IP 65
Electrical protection：■ Reverse polarity ■ Over-voltage ■ Short-circuit

Certification
Certification：CE

Material
Housing：PC
Weight：133g

*Please make sure the product and the device which connect with RS-485 are on common ground, avoid damaged product.

The specifications contained herein are subject to change without notice and any user of said specifications should verify from the manufacturer that the specifications are currently in effect.
Otherwise, the manufacturer assumes no responsibility for the use of specifications which may have been changed and are no longer in effect.

Air handling systems / Fume hood / Biological safety cabinets / Clean room / Laboratory / Industrial machinery and equipment