Features
● Optional multiple output : 4 ... 20 mA / 0 ... 10 V / RS-485 / Frequency / Pulse ( Option )
● Accuracy : ±2% F.S. , Operating pressure : Max. 10 bar
● Calibrated by sonic nozzles calibration system
● Multiple diameter ( DN10 / DN15 / DN20 / DN25 ), easy installation
● Polycarbonate housing, aluminum alloy pipe
● RS-485 programmable software : Data logger / Charts
● Accuracy : ±2% F.S. , Operating pressure : Max. 10 bar
● Calibrated by sonic nozzles calibration system
● Multiple diameter ( DN10 / DN15 / DN20 / DN25 ), easy installation
● Polycarbonate housing, aluminum alloy pipe
● RS-485 programmable software : Data logger / Charts
Applications
Pneumatic system / Compressed air system / Industrial machinery equipment / Pipeline air flow monitoring
Specification
Input |
|
Sensor type |
Thermal mass flow sensor |
Measuring range* |
DN10 : 0 ... 150 l/min |
| *The measurement range is defined at the standard condition(1013 mbar, 20°C). This product is also calibrated at this condition | |
Minimum measuring range |
5 l/min |
Output |
|
Signal |
4 ... 20 mA / 0 ... 10 V / RS-485 / Frequency ( 0 ... 100 Hz ) / Pulse ( 1 ... 100 l/pulse, option ) |
Accuracy |
±2% F.S. |
Temp. influence |
0.2% / °C |
Response time |
t90≦5 sec |
Load resistance |
Current output : ≦ 500 Ω |
Warm-up time |
< 2 min. |
Environmental |
|
Medium |
Air |
Housing operating Temp. / Humid. |
0 ... 50°C / 0 ... 95%RH(Non-condensing) |
Medium operating Temp. / Humid. |
0 ... 50°C / 0 ... 95%RH(Non-condensing) |
Storage Temp. |
-20 ... +60°C |
Operating pressure |
10 bar |
Electrical |
|
Power supply |
DC 24 V ±10% |
Current consumption |
100 mA |
Overvoltage protection |
DC : < 40 V |
Electrical connections |
PVC cable (1 m) |
Installation |
|
Inline type |
DN10 - G1/4″ |
Protection |
|
IP rating |
IP 65 (Housing) / IP20 (Probe) |
Electrical protection |
■ Reverse polarity |
Certification |
|
Certification |
CE |
Material |
|
Housing |
PC |
Pipe |
Aluminum alloy |
Weight |
DN10 : 160 g |
Download
Note : Design and specifications are subject to change without notice.
Note : Please make sure the product and the device which connect with RS-485 are on common ground, avoid damaged product.