HONSBERG OMNI-T Temperature transmitter
HONSBERG OMNI-T
● Analog output 4..20 mA or 0..10 V
● Two programmable switches (push-pull)
● Backlit graphical LCD-Display (transreflective), can be read in sunlight and in the dark
● Programmable parameters via rotatable, removable ring (programming protection)
● Full metal housing with non-scratch, chemically resistant glass
● Physical unit in the display (selectable)
● Rotatable electronic head for best reading position
● Tropical model optionally available
● High temperature model (200 °C) optionally available
● Connection to USB interface for setting parameters
● IP 67
● Two programmable switches (push-pull)
● Backlit graphical LCD-Display (transreflective), can be read in sunlight and in the dark
● Programmable parameters via rotatable, removable ring (programming protection)
● Full metal housing with non-scratch, chemically resistant glass
● Physical unit in the display (selectable)
● Rotatable electronic head for best reading position
● Tropical model optionally available
● High temperature model (200 °C) optionally available
● Connection to USB interface for setting parameters
● IP 67
Features
The primary sensor consists of a platinum resistance sensor using thin film technology, which provides a very good response time, thanks to the lance diameter of 4 mm.
With these sensors, switching points can be set on the spot for where process values are exceeded or fallen short of. This setting can be carried out via the display, even without the process. The present values, or error messages from the measuring point, are visible at all times, and all important parameters can be displayed locally (this saves time during installation, commissioning, and troubleshooting during the process). The analog current signal can be evaluated from large distances, and the present values can be made available there. The sensor is configured to your requirements. It is therefore ready for immediate use, without programming. If you wish to change parameters, you can set the device directly at the sensor, by means of the programming ring.
With these sensors, switching points can be set on the spot for where process values are exceeded or fallen short of. This setting can be carried out via the display, even without the process. The present values, or error messages from the measuring point, are visible at all times, and all important parameters can be displayed locally (this saves time during installation, commissioning, and troubleshooting during the process). The analog current signal can be evaluated from large distances, and the present values can be made available there. The sensor is configured to your requirements. It is therefore ready for immediate use, without programming. If you wish to change parameters, you can set the device directly at the sensor, by means of the programming ring.
Applications
● Analog output 4..20 mA or 0..10 V
● Two programmable switches (push-pull)
● Backlit graphical LCD-Display (transreflective), can be read in sunlight and in the dark
● Programmable parameters via rotatable, removable ring (programming protection)
● Full metal housing with non-scratch, chemically resistant glass
● Physical unit in the display (selectable)
● Rotatable electronic head for best reading position
● Tropical model optionally available
● High temperature model (200 °C) optionally available
● Connection to USB interface for setting parameters
● IP 67
● Two programmable switches (push-pull)
● Backlit graphical LCD-Display (transreflective), can be read in sunlight and in the dark
● Programmable parameters via rotatable, removable ring (programming protection)
● Full metal housing with non-scratch, chemically resistant glass
● Physical unit in the display (selectable)
● Rotatable electronic head for best reading position
● Tropical model optionally available
● High temperature model (200 °C) optionally available
● Connection to USB interface for setting parameters
● IP 67
Specification
Sensor : platinum resistance sensor
Process connection : male thread G 1/4 A.. G1/2 A, union nut G 3/4 or
Tri-clamp connection
Metering range : 0..100 °C (standard range)
: 0..200 °C ( extended range for lance shape with gooseneck )
Measurement accuracy : ±1 % FS
Supply voltage : 18..30 V DC
Power consumption : < 1 W
Analog output : 0/4..20 mA ; 0/2..10 V
Display : backlit graphical LCD-Display
Ingress protection : IP 67
Process connection : male thread G 1/4 A.. G1/2 A, union nut G 3/4 or
Tri-clamp connection
Metering range : 0..100 °C (standard range)
: 0..200 °C ( extended range for lance shape with gooseneck )
Measurement accuracy : ±1 % FS
Supply voltage : 18..30 V DC
Power consumption : < 1 W
Analog output : 0/4..20 mA ; 0/2..10 V
Display : backlit graphical LCD-Display
Ingress protection : IP 67
Note : Design and specifications are subject to change without notice.
Note : Please make sure the product and the device which connect with RS-485 are on common ground, avoid damaged product.