The Hydro-Mix XT-FS has been designed to measure moisture in flowing material where there is a food safe requirement. The sensor is compliant with the requirements of EN 1935/2004 and can easily be installed in ducting, conveying and mixing systems in process control environments. Comprising a single, intelligent unit that contains all on-board functionality including signal processing and averaging, the Hydro-Mix XT-FS accurately measures the moisture content of material passing over the ceramic faceplate. Remote configuration, calibration, diagnostics and firmware upgrades are simple using Hydronix Hydro-Com software. The linear output allows direct integration with any control system using industry standard interfaces.
Moisture range : 0 … 100%
Penetration of field : Approximately 75 ...
100 mm dependent upon material.
Construction : Body : 316 Stainless Steel /
Faceplate : Ceramic / Internal Seals : EN1935/2004 and EPDM FDA Approved O-Rings /
Fixing Plate O-Ring : EN1935/2004 and EPDM FDA Approved
Output : 4 … 20 mA / 0 … 10 V / RS-485
Power supply : DC 15 V … 30 V
, 4 W
Refresh rate : 25 times per second
Operating temperature : -20 … 60°C