Features
Functional highlights
•Galvanic separation of analog current and voltage signals.
•A competitive choice in terms of both price and technology for galvanic isolation of all signal types to SCADA systems or PLC equipment.
•High 3-port isolation provides surge suppression that protects the control system from transients and noise and eliminates ground loops.
•All terminals are over-voltage protected, polarity protected and short-circuit protected.
•Approved for marine applications.
Technical highlights
•Flexible 24 VDC (±30%) supply via power rail or connectors.
•Factory-calibrated measurement ranges.
•Fast response time < 7 ms.
•Excellent signal/noise ratio > 60 dB.
•High galvanic isolation of 2.5 kVAC.
•Inputs and outputs are floating and galvanically separated.
•A green front LED indicates normal operation and malfunction.
Programming
•Easy configuration via DIP switches.
Mounting / installation
•The narrow 6.1 mm housing allows up to 163 units per meter.
•Units can be mounted side by side, horizontally and vertically, without air gap on a standard DIN rail, even at 70°C ambient temperature.
•Units can be supplied separately or installed on PR 9400 power rail.
•Galvanic separation of analog current and voltage signals.
•A competitive choice in terms of both price and technology for galvanic isolation of all signal types to SCADA systems or PLC equipment.
•High 3-port isolation provides surge suppression that protects the control system from transients and noise and eliminates ground loops.
•All terminals are over-voltage protected, polarity protected and short-circuit protected.
•Approved for marine applications.
Technical highlights
•Flexible 24 VDC (±30%) supply via power rail or connectors.
•Factory-calibrated measurement ranges.
•Fast response time < 7 ms.
•Excellent signal/noise ratio > 60 dB.
•High galvanic isolation of 2.5 kVAC.
•Inputs and outputs are floating and galvanically separated.
•A green front LED indicates normal operation and malfunction.
Programming
•Easy configuration via DIP switches.
Mounting / installation
•The narrow 6.1 mm housing allows up to 163 units per meter.
•Units can be mounted side by side, horizontally and vertically, without air gap on a standard DIN rail, even at 70°C ambient temperature.
•Units can be supplied separately or installed on PR 9400 power rail.
Download
Note : Design and specifications are subject to change without notice.
Note : Please make sure the product and the device which connect with RS-485 are on common ground, avoid damaged product.