EGE SC 440/1-A4-GSP Flow Sensors

EGE SC 440/1-A4-GSP
  • EGE SC 440/1-A4-GSP Flow Sensors
Features
•G1/2 screw-in sensor for flow monitoring of liquid media
•Corrosion-proof stainless steel housing AISI 316 Ti
•Immersion depth 48 mm
•LED line for flow status
•M12 plug system
•PNP-NO switching output
•Adjustment with potentiometer
Specification
TYPE
SC 440/1-A4-GSP
Product ID
P10523
Medium
water, oil
Detection range water
1 ... 150 cm/s
Detection range Oil
3 ... 300 cm/s
Process connection
G1/2
Sensor length L
48 mm
Output
switching output
Output function
PNP-NO
Supply voltage
24 V DC +/- 20 %
Current consumption max.
70 mA
Switching current max.
400 mA (20 °C)
Reverse polarity protection
Voltage drop max.
2.5 V
Ambient temperature
-20 ... 80 °C
Medium temperature
-20 ... 80 °C
Temperature gradient fluids
250 K/min
Start-up time typ.
8 s (2 ... 15 s)
Reaction time typ.
2 s (1 ... 13 s)
Compressive strength
100 bar
Material sensor touched by medium
stainless steel AISI 316 Ti
Material housing
stainless steel AISI 303, stainless steel AISI 316 Ti, brass, PA
Protection [EN 60529]
IP 67
Electrical connection
M12 connector
Accessories
connecting cable SLG 3-2, SLG 3-5, SLW 3-2, SLW 3-5
Accessories (in scope of delivery)
2 x gasket G1/2 AFM 34, screwdriver
Download
Note : Design and specifications are subject to change without notice.
Note : Please make sure the product and the device which connect with RS-485 are on common ground, avoid damaged product.