HONSBERG Flow Transmitter

HONSBERG RRH
● Uncomplicated measurement of flow rates
● Metal housing with Hall sensor
● Working pressure up to 100 bar
● Long working life thanks to high quality ceramic axis and special plastic bearing
● Run-in and run-out sections are not necessary.
● Modular construction with various connection systems
● Plug-in and rotatable connections
● Output signal PNP or NPN
● Intrinsically safe behaviour
● Optionally, non-return valve, filter, constant flow rate device in the connections
  • HONSBERG Flow Transmitter
Features

The flow meter consists of a spinner which is rotated by the flowing medium. The rotor's rotational speed is proportional to the flow volume per unit time. The rotor is fitted with magnets. A Hall sensor records the rotational speed, which is proportional to the flow rate.

Applications
● Uncomplicated measurement of flow rates
● Metal housing with Hall sensor
● Working pressure up to 100 bar
● Long working life thanks to high quality ceramic axis and special plastic bearing
● Run-in and run-out sections are not necessary.
● Modular construction with various connection systems
● Plug-in and rotatable connections
● Output signal PNP or NPN
● Intrinsically safe behaviour
● Optionally, non-return valve, filter, constant flow rate device in the connections
Specification
Sensor : hall element
Nominal width : DN 10 (RRH-010) ; DN 25 (RRH-025)
Mechanical Connection :
female thread G 3/8, G 1 ;
male thread G 3/8 A, G 1 A ;
hose nozzle Ø11, Ø30 
Pressure resistance : PN 100 bar
Medium temperature : 0..100 °C|
Current consumption : 30 mA
Output current max. : 100 mA
Ingress protection : IP 67
Note : Design and specifications are subject to change without notice.
Note : Please make sure the product and the device which connect with RS-485 are on common ground, avoid damaged product.