Features
- High precision
- No magnetic components in the flow space
- High pressure resistance
Specification
Sensor：biased Hall sensor
Nominal width：DN 15..50
Process connection：male thread G 1/2 A...G 2 A
Metering ranges：1.8..1133 l/min for details, see table "Ranges"
Measurement accuracy：±1 % of full scale value in the specified metering range, including linearity and repeatability
Medium temperature：-20..+85 °C / optionally -20..+150 °C (for 8 bar min.)
Ambient temperature：-20..+70 °C
Storage temperature：-20..+80 °C
Materials medium-contact：Housing stainless steel 315 / Turbine stainless steel 430 / Bearing tungsten carbide
Material electronics housing：CW614N nickelled
Max. particle size：0.5 mm
Pressure loss：0.3 bar at Qmax.
Pressure resistance：PN 250 bar
Supply voltage：10..30 V DC
Signal output：transistor output "push-pull" (resistant to short circuits and polarity reversal)
Iout = 100 mA max.
Current consumption：20 mA without load
Max. load current：100 mA
Electrical connection：for round plug connector M12x1, 4-pole
Nominal width：DN 15..50
Process connection：male thread G 1/2 A...G 2 A
Metering ranges：1.8..1133 l/min for details, see table "Ranges"
Measurement accuracy：±1 % of full scale value in the specified metering range, including linearity and repeatability
Medium temperature：-20..+85 °C / optionally -20..+150 °C (for 8 bar min.)
Ambient temperature：-20..+70 °C
Storage temperature：-20..+80 °C
Materials medium-contact：Housing stainless steel 315 / Turbine stainless steel 430 / Bearing tungsten carbide
Material electronics housing：CW614N nickelled
Max. particle size：0.5 mm
Pressure loss：0.3 bar at Qmax.
Pressure resistance：PN 250 bar
Supply voltage：10..30 V DC
Signal output：transistor output "push-pull" (resistant to short circuits and polarity reversal)
Iout = 100 mA max.
Current consumption：20 mA without load
Max. load current：100 mA
Electrical connection：for round plug connector M12x1, 4-pole
Download
Note : Design and specifications are subject to change without notice.
Note : Please make sure the product and the device which connect with RS-485 are on common ground, avoid damaged product.