dryer is to dry the raw materials to control the moisture content. Excess water
will evaporate, and the water vapor will be discharged through the moisture
exhaust outlet. Since it is not possible to directly measure the moisture
content of the raw materials, it is necessary to measure the absolute
temperature and humidity at the inlet and outlet of the hot air circulation
pipe of the Tunnel dryer to control the moisture content of the raw materials.
Tunnel dryers need to accurately measure the amount of water vapor contained in the volume of air, and uses absolute humidity to measure the temperature and humidity transmitter, which will avoid the influence of humidity because of temperature changes in the air, causing humidity measure is incorrect. eYc THM06 is installed at the exhaust and return air of the hot air circulation duct use the absolute humidity unit measuring the dryness of the exhaust air to maintain the temperature and humidity of the dryer within the set value range. A variety of physical quantity units can be selected through the UI software for measurement according to request, including: temperature (-40...180℃), humidity (0...100%RH), dew point (-40 ... 60dp) ℃), frost point (-40 ... 0 fp℃), absolute humidity (0…700 g/m3), wet-bulb temperature (0 ... 100℃), vapor pressure (0 ... 1100 mbar), mixture ratio (0…999 g/kg) ), specific enthalpy (0 ... 2800 kj/kg) improves the convenience of checking measurement units.
eYc Industrial Temperature and Humidity Transmitter is goood to use in high temperature environment, measuring temperature -40… 180℃ (optional 200℃), resist 16 bar, IP65, adopting temperature and humidity calibration equipment quality inspection calibration production verification (IEC 61298). eYc THM06 specially designs temperature compensation and computer linear correction temperature and humidity function, accuracy is highly, accuracy: temperature ±0.15°C+0.002°C x tactual, humidity (0...90%) Nonlinear error: ±1.2%RH / Hysteresis error: ±0.8%RH / Repeatability error: ±0.4%RH.
The casing is made by one-piece stainless steel, resist corrosive gas environments. It is lightweight and easy to use with various equipment and machines. It can be adjusted with the display panel for on-site monitoring. The csaing can be rotated by 330 degrees to meet multiple viewing angles on the site. Suitable for a variety of applications, such as: semiconductor / electronics industry / steel industry / process control (drying or humidification) / environmental control / high humidity storage / chemical / pharmaceutical / biotechnology industry / tobacco industry / food industrial, etc.
eYc THM06 Industrial Temperature and Humidity Transmitter